HIGH-TEMP RED SILICONE
Creates a gasket of any size or shape.
Resistant to high pressure and temperature.
Application:
- Apply only to a clean, dry and grease-free surface.
- First, cut the nozzle of the tube at an angle of 45 ° as well as according to the required thickness.
- Insert the tube into a special gun.
- When applying, hold the gun at an angle of 45 °.
- Remove silicone excess with a knife.
- The silicone is covered with crust for 5-15 minutes, hardens after 1 hour, completely hardens after 24 hours.
- Leave a little silicone protruding from the nozzle of the tube, this will provide protection from drying inside the nozzle itself, which will facilitate its further use.
